Advanced Operations; Looking For The Scene; You Want - JVC HR-J260EK Instructions Manual

ADVANCED OPERATIONS

Looking For
The Scene

You Want

REVIEW
1
4
7
1
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search, press PLAY .
2 3
2
5 6
8 9
0
4
30 SEC
?
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
@ #
(4 or ¢). "4 1" or "¢ 1" is
Press or
displayed on screen and search begins in the corre-
sponding direction.
To access index codes 2 through 9, press
repeatedly until the correct index number is dis-
played.
Ex.: To locate the beginning of B from the current
position, press
To locate the beginning of D from the current
position, press
A
–2
When the specified index code is located, playback
begins automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many
programmes have been timer-recorded. If you have,
for example, 3 programmes, "REVIEW" and "3"
appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can
access a programme as far as 9 index codes away
from the current tape position.
NOTES:
Instant ReView is not possible while the recorder is in the
Timer mode.
The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
( pg. 20).
@
or
@
twice.
#
once.
Current position
B C D E F
–1 1 2 3
Index number
17
¢ 2
#