Storing Channels Manually; Input Channel - JVC HR-J260EK Instructions Manual

32
1
4
NUMBER
7
1
ATTENTION
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer program-
ming with VIDEO Plus+ in this state, the "GUIDE PROG
SET" screen appears; set the Guide Program numbers on
this screen. "ATTENTION – Regarding Guide Program
Number Set" on pg. 13.
Or perform "Guide Program Number Set" (
2 3
2
5 6
8 9
0
4
?
pg. 38).
SUBSIDIARY SETTINGS (cont.)

Storing Channels Manually

To store channels that were not stored during Auto Set Up (
6) or Auto Channel Set ( pg. 30).
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press %fi to move the highlight bar (pointer) to
"MANUAL CH SET", then press OK or
tion screen appears.
SELECT POSITION
3 @ #
Press % fi
until an
open position in which
you want to store a
channel begins blinking,
then press OK. The Manual
Channel Set screen
appears.

INPUT CHANNEL

4
Press the NUMBER keys to
input the channel number
you want to store.
For HR-J265ES Owners:
First press % fi to select the
band, either CH(regular) or
CC(cable), and press
then input the channel
number.
To input the registered
station name
(ID – pg. 35),
#
press until "– – – –"
(ID setting) begins
blinking, then press % fi.
For fine tuning adjustment, press
blinking, then press % fi. While tuning, "+" or "–"
appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
To change positions, see "Change Station Preset
Position" ( pg. 33).
If you wish to set station names other than the ones
registered in your recorder,
page 34.
#
. The Confirma-
(Ex.) To store in position 6.
PR CH ID PR
01 26 BBC1 08
02 33 BBC2 09
03 23 ITV 10
04 30 CH4 11
05 37 CH5 12
06 –––– 13
07 –––– 14
[ 5 ∞
]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
PR CH ID FINE
06 CH21 –––– +/–
[0–9] : SELECT
] : CURSOR +=
#
[
,
: OK
[MENU] : EXIT
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
#
until "+/–" begins
"Set Stations (B)" on
pg.
CH ID
––––
––––
––––
––––
––––
––––
––––