Table of Contents
Advertisement
AD VAN CED O PERATIO N S
Playback Pic-
ture Adjustment
M a nua l Tra ck ing
Your video recorder is equipped with automatic tracking
control. For most tapes this will automatically adjust the
tracking to suit the particular tape you are playing. In some
circumstances it may be necessary to make manual tracking
adjustments. This is usually only associated with old or worn
tapes or recordings made on old or worn recorders. If the
automatic tracking control fails to operate correctly you will see
noise bars across the picture as shown on the left below. To
correct this you can override the automatic control and adjust
the tracking manually by pressing the TV PRO G buttons.
O VERRIDE AUTO MATIC
TRACKIN G
1
Press
on the remote to engage manual tracking.
ADJUST TRACKIN G
MAN UALLY
2
Press TV PRO G + or – to adjust tracking.
RETURN TO AUTO MATIC
TRACKIN G
3
Press
on the remote to re-engage automatic
tracking.
N O TE:
When a new tape is inserted, the recorder returns to the
automatic tracking mode automatically.
Downloaded from:
https://www.usersmanualguide.com/
0
4
TV PRO G
1
?
O K
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
A CCESS MA IN MEN U
SCREEN
1
Press M EN U .
ACCESS MO DE SET
SCREEN
2
Move the highlighted bar (pointer) to "MODE SET" by
pressing %fi , then press O K or
SELECT PICTURE
CO N TRO L SET MO DE
3
Move the highlighted bar
(pointer) to "PICTURE
CONTROL" by pressing
%fi , then press
O K or
select the desired mode.
AUTO : Provides optimised
picture benefits of
B.E.S.T. Picture
System. Normally
select AUTO.
EDIT :
Minimizes picture degradation during editing
(recording and playback).
SOFT : Reduces image coarseness when viewing
overplayed tapes containing a lot of noise.
SH ARP : Clearer, sharper-edged picture when viewing
images with lots of flat, same-coloured surfaces
such as cartoons.
N O TES:
When you select EDIT, SHARP or SOFT, the selected
mode will not change until you select again.
When you select EDIT to dub tapes, be sure to select
AUTO after you finish dubbing the tapes.
RETURN TO N O RMAL
SCREEN
4
Press M EN U .
N O TES:
When B.E.S.T. is OFF , "PICTURE CONTROL" switches
automatically from AUTO to NORM.
Select EDIT when you are dubbing tapes. Refer to page 24.
17
#
.
MODE SET
B. E. S. T.
PICTURE CONTROL
to
#
AUTO TIMER
O. S. D.
AUTO SP=LP TIMER
[5 ∞ ] =
[MENU] : EXIT
ON
AUTO
OFF
ON
OFF
Advertisement
Table of Contents
