Table of Contents
Advertisement
Chapter 4 System Configuration
The Access Point can be configured by any Java-supported browser, which is Internet Explorer
5.5 or above. Using the Web management interface, you can configure the Access Point and view
statistics to monitor network activity.
Before you attempt to log into the Access Point's Web-based Administration, please verify the
following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer is plugged into the Wireless
Access Point. If you don't have a link light – then try another cable until you get a good link.
4.1 Browser Configuration
4.1.1 Disable Proxy Connection
You will also need to verify that the HTTP Proxy feature of your web browser is disabled. This is
so that your web browser will be able to view the Access Point configuration pages. The
following steps are for Internet Explorer and for Netscape. Determine which browser you use
and follow the appropriate steps.
4.1.2 Internet Explorer (5 or above)
1. Open Internet Explorer. Click Tools, and then select Internet Options.
2. In the Internet Options window, click the Connections tab.
3. Click the LAN Settings button.
4. Clear all the check boxes and click OK to save these LAN settings changes.
5. Click OK again to close the Internet Options window.
4.1.3 Internet Explorer (For Macintosh)
1. Open Internet Explorer. Click Edit/Preferences.
2. In the Internet Explorer Preferences window, under Network, select Proxies.
3. Uncheck all checkboxes and click OK.
To access the Access Point's management interface, enter the Access Point IP address in your
Web browser http://192.168.1.100 The Login Screen will appear. Type the admin (default
user name) in the User name field. (default no password) in the Password field. Click OK.
The home page displays the Login options.
Hide quick links:
Advertisement
Table of Contents
