Planex GW-AP54SGX User Manual page 12

(3) AP Mode Settings
This device can work not only as an Access Point but also as a Point-to-Point Bridge (PtP
Bridge), a Point-to- Multipoint Bridge (PtMP Bridge) or AP Repeater. Simply input the Root
AP MAC Address of the other remote Conception 108Mbps Access point(s).
Bridge
Wireless Bridge can connect another Wireless Bridge and also connect wireless clients at the
same time. Wireless Bridge is used to transparently connect two or more networks. With
Point-to-Multipoint (PtMP) Bridge, you can connect up to 8 networks.
However, all the bridged Conception 108Mbps Access Point in the same domain should apply for
the same settings.
WPA disable
•
Share the same WEP keys
•
The same channel
•
Repeater
Wireless Repeater is used to extend the range of wireless LAN by repeating the wireless signal of
the root AP. However, the throughput will be dropped due to the connection with another repeater
to extend the wireless coverage. When AP Repeater is enabled, the remote repeater will apply the
same settings from the root AP.