Planex GW-AP54SGX User Manual page 11

A unique, hardware-defined address used to identify a device on a network (Ethernet and
wireless). It is assigned at the factory and cannot be changed. Usually you will find this address
on a sticker on the device or on the packaging.
Get IP From
If you are assigning a Manual IP address for the Access Point (recommended), type in an IP
address and Subnet Mask compatible with your network IP scheme.
IP address
The static IP address you want to assign to the AP. The default value is 192.168.1.100.
Subnet Mask
The subnet mask you want to assign for the AP. The default value is 255.255.255.0.
Default Gateway
The Default Gateway IP address is a router or other gateway device used to access IP
networks that are outside the chosen subnet.
If you select DHCP, you will obtain a dynamic IP Address from a DHCP server on your network
(This is not advisable since it will be difficult to determine the dynamic IP address assigned to
the GW-AP54SGX). Using DHCP automatically configures all IP settings upon restart, therefore
the IP Address, Subnet Mask and Default Gateway will be read-only displays when the device
is configured as a DHCP client.
Click Apply if you have made any changes.
(2) Device Information
This page displays the current information including the Device Type, MAC Address, Software
Version, System Name, and System Contact information for both 802.11g and 802.11b.