Planex GW-AP54SGX User Manual page 13

(4) WLAN Parameter Management
In the WLAN Parameter Management screen, you can change the SSID and Channel for the
IEEE wireless environment you are configuring.
SSID
(Service Set Identifier) default is the default setting. The SSID is a unique name that identifies a
network. All devices on a network must share the same SSID name in order to communicate on
the network. If you choose to change the SSID from the default setting, input your new SSID
name in this field. The SSID can be up to 32 characters in length.
SSID Broadcast
Broadcasting the SSID on the wireless network for easy connection with client PCs.(Default:
Enable).
Frequency
2.4～2.4835GHz ( Industrial Scientific Medical Band )
Channel
Available channels depend on the regulations in you area or country. Use the Setup Wizard to
select the country or region for your Access Point. The Setup Wizard is described in the Quick
Installation Guide (customer has to go to QIG for the Setup Wizard) and you can launch it
from the Home tab by clicking Wizard. All devices on the network must be set to the same
channel to communicate on the network.
Data Rate