Maintenance - Planex GW-AP54SGX User Manual

4.2.3.3

Maintenance

(1) Update Firmware
Update Firmware from Web Server
Upgrade the firmware for the Access Point. Click on the link to find upgrades to the firmware on
the Planex Communication Inc. website at http://www.planex.net. After you have downloaded the
upgrade firmware to your local drive, click Browse. Select the firmware and click Apply to
complete the upgrade.
IMPORTANT! The Access Point must be manually reset after every firmware upgrade. After
the GW-AP54SGX has been upgraded and reboots, hold down the reset button on the rear
panel for a few seconds. The device will reset and reboot. Upon rebooting after this manual
reset, the Access Point is ready to use.
(2) Configuration File
Update Configuration File
The current system settings can be saved as a file onto the local hard drive by clicking OK from
Download Configuration File. The saved file can be loaded back on the GW-AP54SGX by
clicking Browse. When you have selected the settings file, click OK from Update Configuration
File.
(3) Restart System