Repeat Playback - JVC HR-J246EK Instructions Manual

16
1
4
7
/
2
1
REW
¶
1
3
Soundtrack Selection (HR-J645EK/ES only)
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO MONITOR on the remote control changes the soundtrack being played back as follows:
TRACK (On-Screen Display)
HI FI
L R
HI FI
L
HI FI
R
NORM
HI FI
NORM
¢
q
¡
2 3
5 6
8 9
0
4
3 ¡
FF
7 8
PAUSE
4 ¢
USE
For Hi-Fi stereo tapes
For main audio of Bilingual tapes
For sub audio of Bilingual tapes
For audio-dubbed tapes
For audio-dubbed tapes

Repeat Playback

Your video recorder can automatically play back the whole tape
20 times repeatedly.
¢
START PLAYBACK
1
1
Press PLAY.
ACTIVATE REPEAT
PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
The Play indicator ($) on the display panel blinks
slowly.
The tape plays 20 times automatically, and then
stops.
STOP PLAYBACK
3
Press STOP at any time to stop playback.
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
NOTES:
"L + R" should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the normal
audio track is played back automatically for tapes with
only normal audio.
For instructions on recording NICAM stereo and
bilingual programmes, refer to page 35.
Bilingual programmes are not currently broadcast in
the U.K. and Ireland.
"O.S.D." must be set to "ON" or the on-screen
displays will not appear (
PLAYBACK (cont.)
pg. 34).