JVC HR-J246EK Instructions Manual page 26

26
1
4
7
/
PROG. CHECK
2
START+/–
1
¶
1
3
OK
¢
q
¡
2 3
5 6
8 9
CANCEL
0
4
TV PROG.+/–
3
¡
7 8
4 ¢
TIMER RECORDING(cont.)
Check And Cancel
Programmes
ACCESS PROGRAMME
DISPLAY AND/OR SCREEN
¢
1
Press PROG. CHECK.
1
The display panel shows the programme start time.
Pressing OK changes the display to the programme
stop time, then the date and preset position.
If the recorder is turned on and the TV is set to its
VIDEO channel or AV mode, you can check program
information on screen as well.
Each time you press PROG. CHECK, the next
programme's information appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.
All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2
Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG. +/– buttons on the
remote control.
Timer Warning
If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning appears on
screen to tell you that the recording
is to start in 5 minutes.
NOTES:
The warning only appears if
you're not in the Timer mode at that time.
If this recorder is being used as the player for tape dubbing,
the warning screen is recorded on the tape in the other video
recorder.
The warning blinks for the entire 5 minutes leading up to the
start of timer recording. To clear the display, press CANCEL.
– WARNING–
TIMER RECORDING
TO START SOON
[CANCEL]