Table of Contents
Advertisement
2. Getting Started
This section explains how to configure the mobile hot-spot using the Web User Interface (Web-UI) provided. This
document assumes that you already have the mobile hot-spot and are now ready to do the configuration (i.e.,
power on, connected to the CDMA network, Wi-Fi on, etc.) You need to use the administrator right to configure
all the options available on the Web-UI.
First, you type in the following URL into the web browser on your client device connected to the mobile hot-spot.
http://192.168.0.1
2.1 Logging on to the Web-UI
To log on to the mobile hot-spot Web-UI, you must have a valid user name and password. The user name and the
password can be changed using Web-UI. When you log on to the mobile hot-spot Web-UI, the USER LOGIN win-
dow is displayed as shown in Figure 1.
[Figure 1] Web-UI Login window
•
Enter your User ID in the User text box. For an admin user, the default User ID is "admin".
•
Enter your password in the Password text box. The default password is "admin".
•
Click "OK" to begin the configuration or click "Cancel" to exit from this setup.
2.2 Configuration Menu
The Homepage is the first screen displayed when you log on to the mobile hot-spot Web-UI as shown in Figure 2.
Configuration Pages
The configuration menu for mobile hot-spot is show on the left side of the homepage.
It allows you to configure functions like Internet, Wi-Fi, etc. Each link is found under the top directory. The fol-
lowing modules are displayed in the left navigation pane.
•
Internet
•
Wi-Fi
•
Firewall
•
Administration
7
Advertisement
Table of Contents
