•
Click "Apply" at any time during configuration to save the information that you have entered.
•
Click "Cancel" to undo any changes.
6.2 Upgrade
To upgrade the system firmware, click on the Upgrade link. A screen is displayed as shown in Figure 12.
[Figure 12] Firmware Upgrade
•
After choosing a system firmware file, click "Apply" to start the firmware upgrade.
6.3 Settings
To update the system configuration or to get the current configuration, click Settings link. A screen is dis-
played as shown in Figure 13.
[Figure 13] Configuration Setting
•
Click "Export" to save the current configuration to a file.
•
Click "Import" to load configuration from a file.
•
Click "Browse" to select a specified file name to change the configuration.
•
Click "Load Default" to go back to factory default settings.
6.4 Manual
The link to view this User's Manual
In this case, you lose all your own
19
settings.