Display Icons; Battery Time; Display Messages; Power Button Led Colors - Cellient MHN200 User Manual

Cdma-1xevdo rev.b mobile hot-spot
Table of Contents

Advertisement

1.3 Display Icons

Icons

1.4 Battery Time

Conditions
Continuous use
Stand-by
Charging

1.5 Display Messages

Messages
Net1
Net1 M-90 1234
No Service
12345678
CONNECTING...
CONNECTED
CONNECTION FAIL

1.6 Power Button LED Colors

Color
Mode
Blinking
Red
Steady on
Blinking
Blue
Steady on
Blinking
Purple
Steady on
Description
Strength of the CDMA signal (levels 0 ~6)
Internet (data call) connection status
No service status
Wi-Fi on/off status
Battery level
Battery charging indicator while charging
Description
3.5 hours while using in good signal status
8 hours
3.5 hours from empty to full charge with power off
5 hours with power on
Description
Operator name displayed while booting
SSID displayed when entering into normal operation ("1234" is an example)
Displayed when mobile hot-spot could not find the CDMA network
Wi-Fi key displayed when user short-press the power button
("12345678" is an example)
Displayed when mobile hot-spot is trying to make a data call
Displayed when mobile hot-spot successfully made a data call
Displayed when mobile hot-spot fails to make a data call
Status
Low battery (below 10%)
No service
Trying to connect to the CDMA network
Connected to the CDMA network and in service state
Waking up from the power saving/Stand-by mode
Power saving/Stand-by mode
5

Advertisement

Table of Contents
loading

Table of Contents