Clients List - Cellient MHN200 User Manual

Field
IP Address
Subnet Mask
MAC Address
DHCP IP Range
DHCP Lease Time
• Click "Apply" at any time during configuration to save the information that you have entered.
• Click "Cancel" to exit from this page without saving the changes.
Caution:
•
If you have changed the local IP address of mobile hot-spot, you must input the new IP address in the
address field of your browser in order to access the Web-UI.
•
If the old and the new IP addresses of mobile hot-spot belong to different subnets (for example, if the
old address is 192.168.0.1 and the new address is 192.168.1.1), then IP addresses of computers con-
nected mobile hot-spot will also change. In this case you should refresh the IP address of your com-
puter in the Windows Network Connections, or simply disconnect your computer from mobile hot-spot
and then re-connect again.

3.3 Clients List

To view the Clients List, click Clients List link. A screen is displayed as shown in Figure 5.
[Figure 5] Clients List
The screen contains the following details.
[Table 6] Fields in Clients List
Field
IP Address
MAC Address
Description
Current local IP address. If changed, you should reconnect mobile hot-spot.
Current subnet mask. You can change according to IP class.
Shows the mobile hot-spot hardware address.
Current DHCP IP range. You can increase accessible user count.
Current DHCP lease time of allocated DHCP IP address.
Description
IP address of Client
MAC Address of Client
11