Installing Your New Recorder; Basic Connections - JVC HR-DD949EE Instructions Manual

INSTALLING YOUR NEW RECORDER

Basic
Connections
Aerial terminal
Back of TV
21-pin SCART
connector
21-pin SCART Cable
Mains Power
Cord
Mains outlet
AUDIO OUT(put) connectors
For connection to the audio input connctors
on a Hi-Fi stereo system
If TV has no 21-pin SCART connector:
Connect an optional AV cable between the TV's AV-IN terminals and the AV1 IN/OUT connector on the rear panel of the
recorder via the optional output cable adapter as illustrated.
TV
TV Aerial
Cable
RF Cable
(provided)
AV1 IN/OUT
Rear view
AV cable
(not provided)
To AV-IN
terminals
It's essential that your video recorder be properly connected.
Follow these steps carefully. THESE STEPS MUST BE COMPLETED
BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in "Specifications" (
SITUATE RECORDER
2
Place the recorder on a stable, horizontal surface.
CONNECT RECORDER TO
TV
3
The connection method you use depends on the type of
TV you have.
RF CONNECTION
To Connect To A TV With NO AV Input Terminals . . .
a– Disconnect the TV aerial cable from the TV.
b– Connect the TV aerial cable to the ANT. IN jack
on the rear panel of the recorder.
c– Connect the provided RF cable between the RF
OUT jack on the rear panel of the recorder and the
TV's aerial terminal.
Before operating the recorder, make sure the
TV's channel is set to the VIDEO channel
( pg. 6).
AV CONNECTION
To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per "RF
CONNECTION".
b– Connect an optional SCART cable between the
AV1 IN/OUT connector on the rear panel of the
recorder and the TV's 21-pin SCART connector.
Before operating the recorder, make sure the TV
is set to the VIDEO (or AV) mode.
CONNECT RECORDER TO
MAINS
4
Plug the end of the mains power cord into a mains
outlet.
After you plug the mains power cord into a mains outlet, the
Auto Set Up display appears on the TV screen and/or on the
recorder's front display panel when the
recorder/remote control is pressed for the first time to power
on the recorder
Output cable adapter (not provided)
To AV1 IN/OUT
connector
pg. 51).
button on the
pg. 4.
Recorder
3
EN