Storing Channels Manually; Input Channel - JVC HR-DD949EE Instructions Manual

40
EN
NUMBER
MENU
PUSH JOG
If the picture for the entered channel number does
not appear . . .
1– Press PUSH JOG
The channel number begins blinking.
2– Hold down PUSH JOG % until the picture appears.
If not picture appears even if you hold down the button
for more than 10 seconds, try the PUSH JOG fi button
until the picture appears.
The displayed channel number will differ from the
one you have entered.
Major Countries
Austria, Denmark, Finland, Holland,
Italy, Norway, Spain, Switzerland,
Sweden, Germany, Egypt
China, Mongolia, Rumania, Bulgaria,
Czech Rep., Slovakia, Hungary, Poland,
Russia
2
1 2 3
6
4 5
7 8 9
0
4
OK
twice.
TV System

Storing Channels Manually

Store channels that were not stored during Auto Set Up (
or Auto Channel Set (
ACCESS MAIN MENU
1
Press MENU twice.
ACCESS CONFIRMATION
SCREEN
2
Press PUSH JOG%fi to move the highlight bar (pointer)
to "MANUAL CH SET", then press OK. The Confirma-
tion screen appears.
SELECT POSITION
3
Press PUSH JOG % fi
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.

INPUT CHANNEL

4
The number "01" appears
blinking beneath "CH".
Press the NUMBER keys to
input the channel number
you want to store.
* If the picture for the
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
B/G
D/K
TUNER SET (cont.)
pg. 39).
until an open position in
entered channel number
does not appear, see the
left column.
To select appropriate TV system, press PUSH JOG
until TV system setting (B/G or D/K) blinks, then press
PUSH JOG %fi. Refer to the table on the left also.
For fine tuning adjustment, press PUSH JOG
the item beneath "CH" begins blinking, then press
PUSH JOG % fi. While tuning, "F+" or "F–" appears.
If necessary, to change the band between CH(regular)
and CC(cable), press PUSH JOG
is blinking, then press PUSH JOG %fi to select the
band.
Repeat steps 3 through 5 as necessary.
To input the station name, see page 42.
To change positions, see "Change Station Channel
Position" pg. 41.
pg. 4)
MANUAL CH SET
PR CH TV SYSTEM
10 CH 01 D/K
[5 ∞ ]/[0-9] : SELECT
= =
[ ] : CURSOR
: OK
[MENU] : EXIT
until
until CH or CC