Recording Features; Record One Program While; Watching Another; Display Elapsed Recording Time - JVC HR-DD840U Instructions Manual

Recording
Features
1
4
7
C.RESET
OSD
2 3
5 6
9
8
0

Record One Program While

Watching Another

ENGAGE TV MODE
1
During recording...
Press TV/VCR. The VCR's VCR indicator goes out. (If
you are using the RF connection (
the output from your VCR, the TV broadcast being
recorded disappears.)
If you are using the AV connection (
the output from your VCR, change the TV's input
mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV's channel selector to set the channel you
want to watch.
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
Make sure "SUPERIMPOSE" is set to "ON" (
The indications are not be recorded.
39
EN
pg. 6) to view
pg. 6), to view
pg. 28).