UTStarcom 5800 Quick Start Manual page 19

To enable the phone lock
1. On the Home screen, click Start > Settings > Security > Device lock.
2. Select Prompt if device unused for then select the amount of time for the phone to be inactive
before automatically locking.
3. Select the Password type then enter and confirm your password.
4. Click Done.
Note
Once you configure the phone lock settings, you can enable the phone lock from the Quick List directly
without configuring the settings again.
To disable the phone lock
• Click Unlock then enter the password you have set to unlock your phone.
To encrypt files on the microSD card
• Click Start > Settings > Security > Encryption and select Encrypt files placed on storage cards.
19