Operating The Pgm And Next Selection Buttons From The Rm-Br300 - Sony BRC-H700 System Manual

9.3 Operating the PGM and NEXT Selection buttons from
the RM-BR300
When you connect the RM-BR300 to the FACTORY USE connector on the AWS-G500, you can
perform switching for the PGM and NEXT selection buttons from the RM-BR300.
Refer to the following diagram to prepare the cables.
Sample Circuit diagram
TALLY/CONTACT connector
Open-collector output
For details, consult your dealer or your Sony service representative.
Caution
1
Connect the RM-BR300 to the FACTORY USE
connector.
2
Press the MENU button.
3
In the top menu, select [Video Utility]
4
(1) select [Remote Switching], and confirm;
(2) select the buttons to be controlled by the
RM-BR300, and confirm.
(1)
The functions of the setting items are as follows.
[Off]: Disables switching from the RM-BR300.
[PGM]: Enables switching operations for PGM
selection buttons 1 to 6 from the RM-BR300.
[NEXT]: Enables switching operations for NEXT
selection buttons 1 to 6 from the RM-BR300.
Use this to perform VISCA camera control.
When the KEY button is lit, you can make
key source selections.
38
Operation with the AWS-G500/G500HD Anycast Station
(2)
FACTORY USE connector
TTL output
Connect the RM-BR300 before configuring this
Caution
setting.
When [Remote Switching] is
Note
enables, the following icon
appears.
Example: When [PGM] is
selected.
5
(1) Select [Trigger], and confirm;
(2) select an input level, and confirm.
The functions of the setting items are as follows.
[Low Level]: Triggers remote switching when input
levels become low.
[High Level]: Triggers remote switching when input
levels become high.
6
Press the MENU button to close the menu.
Icon
(1) (2)