Using The Brc-H700/Brc-Z700 As A Second Camera For The Pcs-Xg80 Video Conferencing System - Sony BRC-H700 System Manual

10
Using the BRC-H700/BRC-Z700 as a Second Camera
for the PCS-XG80 Video Conferencing System
Using the BRC-H700 and the BRC-Z700 as a
Second Camera for the PCS-XG80 Video
Conferencing System
You can connect the BRC-H700, or the BRC-Z700
through the PCS-XG80 Camera Unit.
Connection example for a second camera
Connect the video output connector on the
BRC-H700 and the BRC-Z700 to the VIDEOIN YPbPr
jacks on the front of the Communication System.
First camera (PCS-XG80)
VISCA OUT
/
VIDEO IN AUDIO 2 IN
Y Pb Pr L
to VIDEO IN
YPbPr
PIN (RCA) connector
VISCA cable (not supplied)
to VISCA OUT
TERMINAL
OPEN
R MAINTENANCE
Using the BRC-H700/BRC-Z700/BRC-Z330 as a Second Camera for the PCS-XG80 Video Conferencing System
Select "YPbPr" in "Second Camera Input" of the
Camera setup menu.
To switch the picture shot by two cameras
When the camera input selection is available, the
instruction "F2: Switches to the first camera." Or "F2:
Switches to the second camera." is displayed at
the bottom of the monitor screen. Each press of
the F2 button on the Remote commander
changes the picture shot by each camera.
to VISCA IN
BRC-H700/BRC-Z700
to Video
output
(YPbPr)
39