Backup Recording Function - JVC BR-DV600AE Instructions Manual

RECORDING
By linking this unit to other DV devices, this unit can perform continuous, long-hour recording.
This unit can be set as a backup unit connected to a DV camcorder (GY-DV300/DV500/DV550/
DV5000, etc.). When the recording tape of the source unit ends, this unit can start recording.
This enables long-hour recording.
OPERATE/WARNING
RESET
MONITOR
SELECT
FILTER
1 3200k ALARM
2 5600k
3 5600k+ND
SHUTTER STATUS
MONITOR
MENU
CH-1 AUDIO CH-2
LEVEL
AUTO IRIS FULL AUTO BLACK LOLUX
BACK L STRETCH
NORMAL NORMAL
SPOT L COMPRESS
NG POWER
ON OFF
Connection
Connect the DV terminal of the source unit to the
DV terminal of this unit with a DV cable.
Setting up this unit
Set the INPUT SEL. switch on the front
panel to "DV".
Set the BACKUP REC TIME item of the
SYSTEM (1/2) menu.
Use the following settings according to the length
of the tape of the source unit.
For DV or mini DV cassettes:
25MIN : 30-minute tape
55MIN : 60-minute tape
75MIN : 80-minute tape
115MIN : 120-minute tape
175MIN : 180-minute tape
265MIN : 270-minute tape
OFF : No backup recording
Set the TC DUPLICATE item of the TIME
CODE menu to "OFF".
• It records the data of the built-in time code
generator or the built-in clock.
• When the TC DUPLICATE menu item is set to
"AUTO" or "NON DROP", the time code of the
DV camcorder will stop advancing. If the DV
cable is disconnected, the time code of the
backup recording will stop advancing.
E-40

Backup recording function

–
LIGHT
ON
OFF
COUNTER
CTL
TC
UB
DV cable
DV terminal
Backup unit: the main unit
OPERATE
A.DUB
Mini
PROFESSIONAL
MIC REMOTE SEL. INPUT SEL.
SERIAL
9PIN WIRELESS DV
DV terminal
INPUT SEL. switch
Operation
1.
Recording begins on the source unit.
* Please record from the beginning of the re-
cording tape.
2.
This unit begins recording when the
tape of the source unit is near the end
(about 5 minutes before the end of the
tape).
• This unit begins recording when the record-
ing time of the source unit reaches the time
configured by the BACKUP REC TIME set-
ting.
Memo
• Backup recording records the video and sound
from the source unit to the main unit.
While this unit is performing backup record-
ing, please continue shooting from the source
unit.
• The audio mode is the mode configured in the
source unit. (32K/48K)
• Please set the BACKUP REC TIME item to
"OFF" if the unit is not performing backup re-
cording.
DVCAM NTSC PAL REC INH.
CH-1/3
CH-2/4
LINE
Y/C
BR-DV3000
–
EJECT
MENIU
REC PLAY PAUSE
SET
REW STOP FF