Timer Recording; Show View ® Timer Programming - JVC 0203-AH-CR-LG Instruction Manual

Timer Recording

Up to 7 timer recording programmes within a month can be
made.
Set the clock properly. (
Set "SYSTEM" to the appropriate mode. (
Load a cassette with the record safety tab intact.
NOTES:
1
7)
4)
®
S V Timer Programming
HOW IEW
The S V numbers are the numbers next to the programme
HOW IEW
in most TV listing.
A
Press
S V number screen.
HOW IEW
Press rt to select "ONCE" (once),
"DAILY" (Monday–Friday) or "WEEKLY"
(weekly serials).
B
Press the appropriate
input the S V
HOW IEW
. The program list appears.
If the number you entered is invalid,
"PLEASE CHECK" appears on the screen.
Input a valid S
HOW
press .
If the number you entered is invalid,
press w, then input a valid S
C
Check the settings.
If "- -" is displayed on the channel
position, press w e to select "- -", then
press the
the channel position you want to record
manually. This channel position is
registered to the recorder.
To change the channel position, press w
e to select the "PR" setting, then press the
to select the channel position you want to record manually.
To change the date, press w e to select the "DATE" setting, then
press the appropriate
To change the daily or weekly serials,
press w e to select the "DATE" setting,
then press . Press w e, then press
.
To change the stop time, press w e to
select the stop time. Press the
appropriate
To set VPS/PDC, press w e to select the
space between the stop time and the
tape speed, then press rt. If you set
"VPS/PDC" to "ON", " " appears.
"VPS/PDC Recording" on page 13.
To set the tape speed (SP/LP/IP), press w
e to select the tape speed, then press
rt.
"Intelligent LP Recording (HR-V505/V506/V507E only)" on
page 13.
D
Press . Press
E
Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
If a cassette has not loaded when the recorder enters the timer
standby mode, the timer indicator blinks on the display panel.
To timer-record a satellite broadcast using the S
1
A
Perform steps
"AV2".
B
Set the satellite receiver to the appropriate channel before the
selected programme begins.
C
Leave the satellite receiver's power on.
— 12 —
to access the
to
number, then press
V number, then
IEW
V number.
HOW IEW
or rt to select
or rt.
or rt.
again to return to normal screen.
5 3
– . In step , set the channel position to
or rt
V system:
HOW IEW