On-Screen Display; Main Menu - JVC 0203-AH-CR-LG Instruction Manual

On-screen display

If you press ( ) on the remote control when "OSD" is set to
"ON" ( 5), you can see the current recorder status on the
screen. The indications except the clock or time counter
disappears in about 5 seconds. To clear the on-screen display
completely, press ( ) again.
The indications are not recorded even if the recorder is in the
recording mode.
A Channel and auxiliary input
B Clock*
C Tape position*
D Time counter*
E Current day/month/year
F Tape speed
G Recorder operation mode
PLAY appears when you playback.
appears during rewinding, or blinks during
REW rewinding with Rewind Power Off function.
( 10)
FF appears during fast-forwarding.
EJECT appears when you eject the cassette.
STOP appears when you stop playback or recording.
RECORD appears during recording.
RECP appears in the record pause mode.
appears when the recorder enters in child lock
SAFE mode, or any buttons on the recorder are pressed
during child lock mode. (
OK

Main Menu

You can perform various operations or change various mode
settings on the Main Menu Screen.
Turn on the recorder and the TV, and set your TV to its AV
mode or video channel.
The procedure shows how to set "OSD" to "ON".
15)
— 4 —
A
Access Main Menu screen
Press . Press w e to select the icon
"OSD", then press .
If you select the icon A to D, follow the
each setting procedure.
If you select the icon E to L, go to
2
step .
B
Change setting
Press rt to set to "ON", then press w or
e.
C
Return to normal screen
Press .
A REC Select this icon to timer-record the programme.
( 13)
B PR SET Select this icon to perform Manual Channel Set.
( 8, 9)
C ACMS Select this icon to perform Auto Channel Set.
( 7) Auto Channel Set automatically assigns
all receivable stations in your area.
D TIME
Select this icon to set clock manually. (
DATE
E SYSTEM AUTO / PAL / MESECAM
You can play back PAL, NTSC and MESECAM
tapes, or record PAL and SECAM* signals on this
recorder. Select the appropriate colour system.
AUTO: Normally select this. The appropriate
colour system is selected automatically
depending on the playback or recording signals.
If "AUTO" does not work correctly, set the
following mode manually.
PAL: To record PAL signals, or playback a PAL.
MESECAM: To record SECAM signals, or play
back a MESECAM tape.
NOTES:
OSD
bold
7)