Timer Programming; Checking, Canceling Or Changing Programme Settings - JVC 0203-AH-CR-LG Instruction Manual

Timer Programming

A
Press . Press w e to select the icon
"REC", then press . The programme list
appears.
B
Press .
C
Press the appropriate
set the channel, date, start time and stop
time. Input "0" before any single number
entries.
To time-record daily (Monday–Friday) or
weekly serials, press w e to select the
"DATE" setting, then press
e, then press .
To set VPS/PDC, press w e to select the
space between the stop time and the
tape speed, then press rt. If you set
"VPS/PDC" to "ON", " " appears.
"VPS/PDC Recording" below.
To set the tape speed (SP/LP/IP), press w
e to select the tape speed, then press
rt.
"Intelligent LP Recording (HR-V505/V506/V507E only)" on
the right column.
D
Press . Press
E
Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
If a cassette has not loaded when the recorder enters the timer
standby mode, the timer indicator blinks on the display panel.
To timer-record a satellite broadcast using Timer Programming:
1 5
A
Perform steps – . In step
"AV2".
B
Set the satellite receiver to the appropriate channel before the
selected programme begins.
C
Leave the satellite receiver's power on.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery
Control) and VPS (Video Programme System) are service designed
to assure safe, accurate timer recording. With this system, your
recorder will start and stop recording when the preset TV
programmes actually start and end — even if the broadcast time of
a preset TV programme is changed.
NOTES:
REC
to
ARD
. Press w
- -
again to return to normal screen.
3
, set the channel position to
Intelligent LP Recording (HR-V505/V506/V507E only)
When you set the tape speed to "IP", the recorder automatically
switches to LP mode to allow complete recording if there is not
enough tape to record the entire programme while timer-
recording in SP mode.
recording a programme of 210 minutes in length
onto a 180-minute tape.
Approximately 150 minutes
SP mode
NOTES:
Checking, canceling or changing programme
settings
A
Disengage timer recording standby mode
Press 1.
B
Access Main Menu screen
Press . Press w e to select the icon
"REC", then press
appears.
C
Cancel or change programme setting
select the programme you want to delete,
then press w.
select the programme, then press
Press w e to select the item you want to
change, then press the
After confirming all information is correct, press
D
Return to normal screen
Press .
E
Re-engage timer recording standby mode
Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
— 13 —
Approximately 60 minutes
LP mode
Total 210 minutes
REC
. The programme list
press rt to
press rt to
.
or rt to change the settings.
.