Coleman EVEN HEAT Assembly Manual page 16

ASSEMblY iNSTrucTioNS
12
CF
Front view
13
EA
A
Front view
B
Close up
EM3
CJ
PROPANE MODEL ONLY
Remove the Quick Check™ tank support
bracket (EM3) from the carton located
under the control panel (CF). Assembly
of this part will be resumed in Step 16.
ATTENTION:
open The carTon WiTh care To
avoid damaging or cuTTing The
Quick check™ hydraulic Tube
(em2).
do noT bend The Quick check™
hydraulic Tube (em2).
do noT pull or place
unnecessary force on To The
Quick check™ hydraulic Tube
(em2) connecTion poinTs aT
The fuel gauge (em1) or Tank
supporT brackeT (em3), as
This may cause a leak in The
hydraulic Tube, resulTing
in unreliable fuel gauge
readouTs.
Assemble the door support rail (CJ)
to the left and right upper side panels
(EA and EB), as shown.
WARNING:
This parT may have sharp
edges. Wear proTecTive gloves
When assembling.
EB
YOU WILL NEED:
1
X 4
14
4 5
X 4 X 4