JVC RM-LP25U Instructions Manual page 9

[LEVEL] level adjustment knob:
For adjusting the gamma level.
Decreases the
reproducibility of dark
areas.
Note:
● The feature is not available on the camera if the light of
the corresponding button is not lit. Control using this unit
is disabled in this case.
H
[BLACK] Black Control Unit
For switching the gain value of dark areas. Switch using the
video signals to be shot.
[STRETCH] Stretch button:
Enhances the contrast of dark areas in an image by
stretching only the signals of the dark areas.
[COMPRESS] Compress button:
Compresses the gain value of dark areas to enhance the
contrast when the image shot is bright and has little contrast.
Memo:
● When both buttons light up in green, or when one button
lights up in green and the other is not lit, the setting
becomes NORMAL (no correction).
Note:
● The feature is not available on the camera if the light of
the corresponding button is not lit. Control using this unit
is disabled in this case.
I
White Balance Control Unit (A 17 page)
For specifying the white balance settings.
[WHITE BALANCE MODE] White Balance Mode
selection button
For setting the white balance mode.
The indicator of the selected mode lights up in orange.
Setting Value
MANUAL White balance value that is set using the
White Paint R/B adjustment knob is used.
PRESET The preset white balance value (3200K) is
used.
FAW Switches to the FAW (Full-time Auto White
Balance) mode, and white balance is
automatically adjusted to an appropriate
value.
AW A The value stored in the camera's auto
white balance memory A or B is used.
AW B
[AUTO WHITE] Auto White button
Pressing this button when [WHITE BALANCE MODE] is set
to AW A or AW B lights up the button in orange and
starts up the auto white feature.
After the adjustment is complete, the result is indicated by
the indicator.
LEVEL GAMMA
Enhances the
reproducibility of dark
areas.
Function
Lights up in green : Auto white is successfully
Blinks in orange : Auto white is abnormally
B Lights up in green
Note:
● When [WHITE BALANCE MODE] is set to MANUAL ,
PRESET , or FAW , this button is not lit, and auto white
does not start up.
● Setting the [BARS] button S to ON outputs a color bar
image. In this case, this button is not lit, and auto white
does not start up.
[PAINT] Paint button and indicator light:
When [WHITE BALANCE MODE] is set to AW A or AW
B , you can specify whether fine-tuning on the value stored
at the camera is to be performed.
ON : Fine-tuning enabled.
(Orange light on)
OFF : Fine-tuning disabled.
(Green light on)
In addition, when [WHITE BALANCE MODE] is set to
MANUAL , the orange light turns on, and adjustment of the
R/B channel's gain value using the [WHITE PAINT R/B] knob
is enabled.
Note:
● After the auto white operation is complete, this button is
indicated as OFF (green light on).
● When [WHITE BALANCE MODE] is set to PRESET or
FAW , this button is not lit, and the [WHITE PAINT R/B]
knob control is disabled.
[WHITE PAINT R/B]White Paint R/B adjustment knob:
The functions available differs according to the white balance
mode button selected.
Setting of Feature of White Paint
White Balance Knob
Mode
Selection
Button
MANUAL Knob for adjusting the R/B
channel's gain value.
PRESET/FAW Disabled.
AW A Knob for fine-tuning the
white balance value
AW B
obtained during auto
white balance adjustment.
Memo:
● You can select the corresponding white balance mode
button to store settings for MANUAL , AW A , and AW
B respectively.
completed.
terminated.
Adjust by turning the [WHITE
PAINT R/B] knob.
The [WHITE PAINT R/B] knob is
disabled.
Status of
Paint
Indicator
Light
Lit
Not lit
Lit