Handset battery
It takes up to hours for the battery to be fully charged.
When it is fully charged, you can expect the following
performance:
Operation
While in handset use (talking*)
While in speakerphone mode (talking*) Up to five hours
While not in use (standby**)
* Operating times vary depending on your actual use and the age
of the battery.
** Handset is not charging or in use.
The battery needs charging when:
•
A new battery is installed in the handset.
•
The handset beeps.
•
A battery is properly installed and the screen is blank.
•
Low battery or Place in charger displays on the cordless
handset screen.
CAUTION:
To reduce the risk of fire or injury, read and follow these
instructions:
•
Use only the batteries provided or equivalent. To order
a replacement, go to www.vtechcanada.com or call
1 (800) 267-7377.
•
Do not dispose of the batteries in a fire. Check with local
waste management codes for special disposal instructions.
•
Do not open or mutilate the batteries. Released electrolyte is
corrosive and may cause burns or injury to the eyes or skin.
The electrolyte may be toxic if swallowed.
•
Exercise care in handling batteries in order not to create a
short circuit with conductive materials.
•
Charge the batteries provided with or identified for use with
this product only in accordance with the instructions and
limitations specified in this manual.
•
Observe proper polarity orientation between the battery and
metallic contacts.
•
To prevent fire or shock hazard, do not expose this product to
water or any type of moisture.
Operating time
Up to seven hours
Up to seven days
8