Toshiba RBC-TRP100E Installation Manual page 16

Branch Kit 1:3
<2. Attaching the clamp filter>
Attach the clamp filter supplied with the outdoor unit to the lower outdoor fan motor lead
wire.
• Make sure that the claw of the clamp filter is securely locked.
• Pass the banding band supplied with the outdoor unit through the upper hole of the
clamp filter to clamp it together with the fan motor lead wire.
• The fan motor lead wires are connected to connectors CN301 and CN300 on the P.C.
board of the outdoor unit.
EN
CN301 CN300
15
Fan motor lead wire
(Lower side)
Banding band
Clamp filter