Canon FAX-L360 Series Service Reference Manual page 13

5.3 Conditions for a Call
The function is enabled when ACTIVATION is set to ON, and the number of prints and the
date currently registered will server as its starting point.
Condition 1:
When as many prints as set for PAGES under CRITERION have been made.
Condition 2:
When the cartridge runs out of toner, requiring replacement.
Condition 3:
When as many days as set for DAYS under CRITERION have been made.
Condition 4:
When a service error related to the printer has occurred.
A log on the following is used for the execution of this function:
Total number of prints made by the printer.
Number of prints that previously satisfied condition 1.
Date/Number of prints that previously satisfied condition 3.
Executing ALL CLEAR or CLEAR for Remote CRG will also clear the log data.
NOTE
Condition 1:
When the difference between the number of prints and the number of prints that previously
satisfied condition 1 reaches the registered number of prints, a BFT file will be prepared and
a call made.
If the registered number of days under condition 3 is [0], no call will be made
under this condition.
NOTE
Condition 2:
When the cartridge runs out of toner to require replacement, a call will be made.
Thereafter, no call will be made under condition 2 until the cartridge has been replaced and
the power has been turned off and then on. However, if condition 2 occurs once again when
the power is turned on after replacement of the cartridge, a call will be made.
12