LG PB56 Series Owner's Manual page 24

10
ASSEMBLING AND PREPARING
NOTE
y The items supplied with your product may vary depending on the model.
y
y Product specifications or contents of this manual may be changed without prior notice due to upgrade of
y
product functions.
How to use the ferrite core
- If there are two ferrite cores, follow as shown in Figures 1.
- If there are three ferrite cores, follow as shown in Figures 1 and 2.
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once.
Place the ferrite core close to the TV and a wall plug.
[to a wall plug]
2 Use the ferrite core to reduce the electromagnetic interference in the cable.
Place the ferrite core close to the TV.
Wind the component Y, Pb, Pr, L, R cable on the ferrite core once.
[to an External device]
Gather and bind the component Y, Pb, Pr, L, R and scart cable with the ferrite core.
[to an External device]
Wind the PC audio cable on the ferrite core once.
[to an External device]
y For an optimal connection, HDMI cables and USB devices
y
should have bezels less than 10 mm thick and 18 mm
width. Use an extension cable that supports USB 2.0 if the
USB cable or USB memory stick does not fit into your TV's
USB port.
[Figure 1]
10 mm(+ / - 5 mm)
[Figure 2-1]
10 mm(+ / - 5 mm)
[Figure 2-2]
10 mm(+ / - 5 mm)
[Figure 2-3]
A
[to the TV] (Black)
[Cross Section of
Ferrite Core]
[to the TV]
[to the TV]
(Black)
[Cross Section of
Ferrite Core]
[to the TV]
B
B
*A 10 mm
*B 18 mm
A