Table of Contents
Advertisement
Tools Required
A phillips-type screwdriver and a 3/8 in. wrench is needed for installation. De-
pending upon the type of installation, a power drill with a 3/32 in. drill bit may also
be required.
Caution and Warnings
WARNING: Be sure not to cut, damage, or puncture the external jacket of the
antenna cables during the installation procedure. Damage to the antenna cable
can cause the SIRIUS signal to be degraded or unavailable, and can also cause
water to intrude into the antenna cable causing the cable to fail.
Splitter Port Identification
For a successful installation, the various cables used in the installation process
described later in this manual must be connected to the correct ports on the Split-
ter. The following illustration identifies the 3 ports on the Splitter. This diagram
should be used for reference during installation.
IN
IN
MODEL SRS-2VB
2300-2400 MHz
OUT1
OUT2
OUT1
OUT2
Home Distribution Kit Installation Manual
Advertisement
Table of Contents
