Panasonic Over The Range Microwave Oven Installation Instructions Manual page 7

(1) Remove two blower cover plate mounting screws and two blower unit mounting screws, top and rear.
(Fig. 1-2-1)
(2) Remove the blower cover plate from the product. (Fig. 1-2-1)
(3) Carefully lift the blower unit and put it on top of product. (Fig. 1-3-1)
(4) Use side cutters or tin snipper to cut and remove knockout parts "A" from back plate. Discard
knockouts. File the openings smooth to prevent injury caused by sharp edges. (Fig. 1-3-2)
(5) Turn blower unit right to left. Then rotate blower unit 90 degrees so the exhaust ports are facing toward
the rear of the product. (Fig. 1-3-3)
(6) Replace blower unit back into product. Be careful not to pinch the lead wires between blower unit and
oven top. Make sure the fan blades are visible through the exhaust openings on the back plate. (Fig.
1-3-4)
IP2386_38Q01CP_Eng_04_080105.indd 7 IP2386_38Q01CP_Eng_04_080105.indd 7
Fig. 1-3-1
Back Plate
Knockouts Parts "A"
Parts "A"
Fig. 1-3-2
Blower Unit
Exhaust Parts
Fig. 1-3-3
Blower Unit
Exhaust Parts
Fig. 1-3-4
7
Back Plate
2009-1-6 Michael 9:16:49 2009-1-6 Michael 9:16:49