Panasonic Over The Range Microwave Oven Installation Instructions Manual page 6

(5) Replace blower cover plate onto the product. Secure blower unit with two screws, one through the blower
plate, and the other through oven back plate. Secure blower plate onto the product top with two screws.
(Fig. 1-2-4)
(6) Slide two tabs of ventilation exhaust covers
two large openings are covered. Secure each with one screw
Make sure two tabs are inserted into square holes and the screw heads are not protruding from blower
cover plate surface.
c. Rear Exhaust
IP2386_38Q01CP_Eng_04_080105.indd 6 IP2386_38Q01CP_Eng_04_080105.indd 6
Blower Unit
Mounting Screws
Blower Unit
Fig. 1-2-4
into two small square openings of blower cover plate so that
u
Fig. 1-2-5
Rear Exhaust
Fig. 1-3
Blower Unit
Mounting Screws
Blower Plate
Back Plate
Blower Unit Mounting Screws
. (Fig. 1-2-5)
i
Wall Cap with Flapper
6
2009-1-6 Michael 9:16:49 2009-1-6 Michael 9:16:49