Panasonic Over The Range Microwave Oven Installation Instructions Manual page 11

INSTALLATION OF BRACKET
1. Draw a wall stud line.
2. Centre the bracket assembly
3. Drill holes. (Fig. 3-2 or Fig. 3-3)
2 Wall Studs
B-1
B-2
Bracket Assembly
3-1 Mark 2 holes on the wall stud line.
3-2 Mark other 4 holes on the other area.
3-3 Remove the bracket.
3-4 Drill two / " holes on the stud line for wood screw.
3
8
3-5 Drill four / " holes for toggle bolts.
5
8
4. Tighten screws and bolts.
4-1 Unscrew toggle bolts and insert through the bracket, then insert the bolts through the dry wall.
(Fig. 3-4)
4-2 Fasten the bracket with two 1
4-3 Tighten four toggle bolts
IP2386_38Q01CP_Eng_04_080105.indd 11 IP2386_38Q01CP_Eng_04_080105.indd 11
against the wall and top cabinet.
a
B-3 B-4
4 Wood Screws q
Fig. 3-2
/ " wood screws
3
4
.
w
One Wall Stud
B-1 B-3 B-4
B-2
Toggle Bolt
w
Fig. 3-3
Fig.3-4
.
q
11
Toggle Bolt
Two Wood Screws
q
2009-1-6 Michael 9:16:49 2009-1-6 Michael 9:16:49