Page 2
By Dogtra Remote Controlled Dog Training Collars Owner's Manual Please read this manual thoroughly before operating the Dogtra EDGE training collar.
Page 3
Duration your dog can wear the unit They are NOT intended for use on people or on animals other than dogs. Dogtra does not assume any liability for the improper use of any Dogtra occasionally reposition the e-collar so the contact points are moved e-collars.
Table of Contents At a Glance……………………………………………………… Main Features of the EDGE……………………………………… Overview………………………………………………………… Understanding your training system 1. How to turn the EDGE on/off……………………………… …………………… ……………………………………………… ………………………… 5. To maximize the distance ………………………………… 6. The LED indicator ………………………………………… 7. Charging the battery ………………………………………...
User expandable to a two, three, or four-dog system - Optional accessories - Replaceable batteries Additional Receivers/Collars with straps The Dogtra EDGE is expandable to a two, three, or four-dog system. Fully waterproof Field auto charger LCD screen outlet.
Turn the mode selection dial to choose the function, and then press the 1. How to turn the EDGE on/off button on the front that is set to the desired collar. The single dog EDGE transmitter until the LCD screen illuminates. To turn the transmitter off, N (Nick) screen shuts off.
Page 8
The receivers/collars can be distinguished by coding the transmitter button to the matching receiver/collar strap color. Additional receivers/collars with straps are available online at shop.dogtra.com or by calling customer service at 1-888-811-9111.
4. How to find the right stimulation 6. The LED indicator The EDGE unit comes installed with the rheostat dial on the transmitter. The rheostat intensity dial controls the stimulation level, with level 1 the receiver when the transmitter buttons are pressed.
8. How to change the stimulation intensity and debris does not build up in the charging port area. The unit is The Dogtra EDGE has the ability to switch between the rheostat/volume waterproof even if the rubber-charging cap is not fully closed.
Push simultaneously 10. Changing the receiver/collar location light color The EDGE receiver/collar location light can be set to any of the 4 colors transmitter, along with the on/off offered. To change the receiver/collar location light to white, red, green, or blue, transmitter.
11. Code Setting 12. How to change the length of the contact points To set the coding for the Dogtra EDGE transmitter to an existing The Dogtra EDGE comes equipped with standard 5/8” contact points that can be extended to 3/4” contact points, for use with dogs with receiver/collar, or an Additional receiver/collar, follow the steps below.
13. How to attach the belt clip on the EDGE 14. How to use the test light To attach the included belt clip to the transmitter, follow Test for a stimulation using the included test light. the instructions below. 1. Turn on the receiver/collar and the transmitter and place the test light over the contact points as shown in the diagram.
15. How to change the battery * Caution - Do not detach the wire by pulling from the battery. The Dogtra EDGE batteries are user replaceable. To replace the battery in the transmitter, follow the instructions below. 1. Begin with the transmitter turned off.
Page 15
To replace the battery in the receiver/collar, * Caution - Do not detach the wire by pulling from the battery. 1. Begin with the receiver/collar turned off. 2. Remove the strap and unscrew the Phillips head screws on the four corners of the receiver/collar.
A leash attached to a standard collar is used to teach the dog basic obedience commands. A tug on the leash/collar is www.dogtra.com. command, use positive reinforcement/praise. Once the dog understands these commands, the e-collar can be used to reinforce them further.
Use the included contact point extensions to extend the length of the Storage maintenance The Dogtra EDGE should be fully charged before storing for extended subtle. Troubleshooting 2. The LED indicator light comes on, but I do not feel any stimulation.
- The charging pin may be damaged. A metal pin inside the charging port product is not registered and a proof of purchase is not available at the time of service, Dogtra will purchase date. A serial number estimate is the only method of determining an approximate date of purchase without product registration or a proof of purchase.
Page 19
1-888-811-9111, for technical support, before sending it to Dogtra for is not responsible for units damaged or lost in transition to Dogtra. Dogtra is not responsible for loss units or any form of compensation during the repair period.
Need help?
Do you have a question about the Edge and is the answer not in the manual?
Questions and answers