Handset Volume Control - AT&T SB67040 User Manual

Handset Volume Control

The Handset volume control changes both ringer and incoming voice volume. You can increase or decrease the incoming voice
volume during an active call or during message playback. You can increase or decrease the ringer volume only if not on an active
call.
To adjust the ringer volume:
12:30p Feb 23
RINGER
EXT 249
John Smith
2 Missed Calls
5 New MSGs
EXIT
Figure 36. Ringer Volume
Getting Started
AT&T SB67040 Cordless Accessory Handset User's Guide
When not on an active call:
Press Volume
OR
Press Volume to decrease the ringer volume.
A screen similar to the one shown in Figure 36 displays. The example shows the volume set
to 3. The minimum ringer volume is zero (silenced) and maximum volume is 6.
If you set the ringer to zero (silenced), the silent ring icon (see
displays on the Idle screen during an incoming call, as shown in Figure 37
.
to increase the ringer volume.
12:30p Feb. 23
INCOMING
EXT 249
Graham Bell
John Smith
232 -555-0176
2 Missed Calls
5 New MSGs
IGNORE FWD-VM
Figure 37. Silenced Ringer
38
"Screen Icons" on page
Silent Ring Icon
20)