Using The Speakerphone - AT&T SB67040 User Manual

Using the Speakerphone

When the speakerphone is active, the SPEAKER hard key is backlit. In Idle or Dial mode, this hard key behaves like PHONE, except
that audio is from the speakerphone.
To use the speakerphone:
12:30p Feb. 23
ON CALL
EXT_#s CONF CID
Figure 7. Speakerphone
Description
AT&T SB67040 Cordless Accessory Handset User's Guide
To initiate a call, press SPEAKER. The key becomes backlit, you hear dial tone, and the
screen shown in Figure 7 displays. You can dial.
To end a call, press OFF. The key backlight goes out, the Idle screen shown in Figure 7
displays.
During an active call, pressing SPEAKER switches audio between the Handset and the
speakerphone.
22