Handset Registration - AT&T SB67040 User Manual

Handset Registration

This procedure provides instructions for registering a Handset. Only one Handset and one Headset can be registered to a Deskset.
For complete information on cordless device registration, see the "SB67030 Deskset User's Guide".
To register the Handset:
12:00a Dec 01 12:00a Dec 01 12:00a Dec 01
Place in charger.
Figure 18. Place In Charger
12:00a Dec 01 12:00a Dec 01 12:00a Dec 01
REGISTER
1/3
To register Handset:
1. Go to your
Deskset.
2. Press MENU.
3. Select User
Figure 19. Register Handset
Getting Started
AT&T SB67040 Cordless Accessory Handset User's Guide
If the Handset is not registered to a Deskset, the Place in charger notification
screen shown in Figure 18 displays upon powering up.
1. Place the Handset into the Charger. The Handset generates a beep and the
Register Handset screen shown in Figure 19 displays.
2. Press MENU on the Deskset.
3. Press 2 on the Deskset dial pad.
If you have set a user password, the User
Password screen shown in Figure 20
displays.
Enter your password and press
SELECT.
To correct errors, use the
To cancel your changes on that screen,
press
return to the previous screen.
key.
at any time. The set will
31
User Password
Enter user password:
Use dial pad to enter user password.
Press SELECT when done.
Backspc
Figure 20. Enter User Password
Quick
Dial
Cancel