Adjusting Dsp Sound Parameters - JVC TH-A5 Instructions Manual

Creating Realistic Sound Fields
REW
B.SEARCH
2 3
DVD
1
4
7
SLOW
ANGLE
REPEAT A-B REPEAT
CLEAR
4
To adjust the output level for the rear speakers
1) Press SOUND repeatedly until "REAR"
appears on the display.
• Each time you press the button, the indication on
the display changes as follows:
00 F 00
Normal
REVERB
indication
(canceled)
REAR : To adjust the output level for rear speakers
(from –06 dB to +06 dB).
• "REAR –06dB" is the initial setting. If you have already
changed the setting, another value will appear.
2) Press 3 or 2 to adjust the output level.
3 : Increases the output level.
2 : Decreases the output level.
5
To adjust the overall level of DSP effect
Press EFFECT repeatedly to adjust the overall
level.
"EFFECT (with the current setting)" or "DEFAULT" appears on
the display.
• Each time you press the button, the effect level changes as
follows:
EFFECT 1
DEFAULT
As the number increases, DSP effect becomes stronger.
• "DEFAULT" is the initial setting. For in-depth information
about "DEFAULT (initial)" setting, see the table to the right.
24
FF
VCR CHANNEL
TUNING
F.SEARCH
ENTER
VOLUME
FM/AM AUX MUTING
SOUND
SOUND
2 3
SETTING
5 6
PRO LOGIC
8 9
SETUP TEST
0
DSP MODE
ZOOM D.R.C DSP MODE
EFFECT
PROGRAM
EFFECT
SEARCH REMAIN SLEEP
00 R 00 REAR
LIVE ROOM
EFFECT 2
EFFECT 3

Adjusting DSP Sound Parameters

You can fine-adjust DSP modes more minutely by changing three
parameters—room, liveness, and reverberation.
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
1
Press DSP MODE (or DSP on the front
panel) repeatedly to select the desired
DSP mode.
2
Press SOUND repeatedly to select the
desired DSP sound parameter.
• Each time you press the button, the indication on the
display changes as follows:
00 F 00
Normal
indication
(canceled)
ROOM : To adjust the resonance based on the room size.
SOUND
LIVE (Liveness) : To adjust the liveness. The larger this
REVERB (Reverberation) : To adjust the reverberation
• The following diagram shows the "DEFAULT (initial)"
settings of the DSP sound parameters for each DSP mode.
DSP MODE
HALL
THEATER
PAVILION
DANCE CLUB
LIVE CLUB
3
Press 3 or 2 to adjust the DSP sound parameter.
EFFECT
3 : Increases the value.
2 : Decreases the value.
4
Repeat 2 and 3 for setting the other DSP sound
parameters.
Note:
Pressing EFFECT to adjust overall level of DSP effect will change
your fine-adjustments to the fixed level.
00 R 00
REVERB LIVE
The larger this value is, the more effective the
resonance is (from 04 to 16 by 2 steps).
value is, the more liveness is obtained (from 04 to
16 by 2 steps).
time of the sound (from 0.0 msec to 1.6 msec by
0.2 msec steps).
ROOM LIVE
08 16
04 10
08 04
04 08
08 16
DSP MODE
SOUND
REAR
ROOM
REVERB
0.4
1.0
0.2
1.6
1.4