Tuner Operations; Setting The Am Tuner Interval Spacing; Tuning In Stations - JVC TH-A5 Instructions Manual

Tuner Operations

STANDBY/ON
AUDIO
TV VCR
TOP MENU MENU
AUDIO/
FM MODE
AUDIO/
SUBTITLE
FM MODE
TUNER DISPLAY RETURN
PRESET
DOWN TUNER PRESET
DOWN
TUNING –
REW
VCR CHANNEL
B.SEARCH
FM/AM
DVD FM/AM
1
1
4
9
7
0
SLOW
ANGLE NTSC/PAL
ZOOM
REPEAT A-B REPEAT
CLEAR SEARCH
For basic tuner operations, see "Basic Tuner Operations" on page
14.

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and other countries use
10 kHz spacing.
• 9 kHz interval spacing is the initial setting.
• Each time you do the following procedure, the AM tuner interval
spacing alternates between 9 kHz and 10 kHz.
1
Select AM as the band.
2
Press 9, 1, and 0 on the remote control.
The new setting for the interval spacing appears on the display,
and the band changes into FM.
3
Press FM/AM on the remote control to select AM
as the band again.
44
VCR
CONTROL
OFF ON
TV CHANNEL
TV VOLUME
STEP TV/VIDEO
TUNER
PRESET
UP
UP
TUNING +
FF
TUNING
F.SEARCH
ENTER
VOLUME
AUX MUTING
SOUND
2 3
SETTING
5 6
PRO LOGIC
8 9
SETUP TEST
0
D.R.C DSP MODE
PROGRAM
PROGRAM EFFECT
REMAIN SLEEP

Tuning in Stations

From the remote control:
1
Press FM/AM repeatedly
to select the band.
The last received station of the
selected band is tuned in.
• Each time you press the button, the band alternates between
FM and AM.
2
Press and hold
TUNING + or –
until you find the
B.SEARCH
frequency you want.
• TUNING + : Increases the frequency.
• TUNING – : Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
On the front panel:
1
Press SOURCE repeatedly until the
desired band appears on the display.
The last received station of the selected band is tuned
in.
• Each time you press the button, the source changes as follows:
DVD player*
AM
* "WAIT" appears on the display.
2
Press 7 so that "MANUAL" appears on the
display.
• Each time you press the button, the operation mode of
¢ and 4 buttons alternates between "PRESET" and
"MANUAL."
PRESET : Select this for using ¢ and 4 as the
buttons to select the preset station.
MANUAL : Select this for using ¢ and 4 as the
buttons to change the frequency manually.
3
Press and hold ¢ or 4 until
you find the frequency you want.
• ¢ : Increases the frequency.
• 4 : Decreases the frequency.
Notes:
• When a station of sufficient signal strength is tuned in, the
indicator lights up on the display.
• When an FM stereo program is received, the
lights up.
• When you press the button repeatedly, the frequency changes step
by step.
DVD FM/AM AUX MUTE
VCR CHANNEL
TUNING
F.SEARCH
SOURCE
AUX IN
FM
indicator also