Printing Specifications; Paper Handling - Epson LQ-2180 Service Manual

LQ-2180

1.1.3 Printing Specifications

† Copy capability:
1 original + 5 copies
† Printing speed and printable column (See the table below.)
Print Speed and Corresponding Printable Columns
Printing mode Character pitch
High speed draft 10 cpi
10 cpi
Draft 12 cpi
15 cpi
17 cpi
Draft condensed
20 cpi
10 cpi
LQ 12 cpi
15 cpi
17 cpi
LQ condensed
20 cpi
NOTE: When the power supply voltage drops to the lower limit,
the printer stops printing and then resumes printing
remaining on that line more slowly than before.
NOTE: When the head temperature rises to the upper limit, the
printer stops printing. When the head temperature falls
to the normal level, the printer starts printing again more
slowly than before.
NOTE: The maximum printable width is 13.6 inch (345.44 mm).
Product Description
Table 1-4.
Printing speed (cps)
Printable
columns
Normal
136 480
136 360
163 431
204 539
233 308
272 359
136 120
163 143
204 179
233 204
272 238
http://www.4008109977.com

1.1.4 Paper Handling

This section only describes the release lever setting, adjust lever
setting, and some other specifications which are specific to LQ-2180.
For the rest of the specifications, see the LQ-2170 Service Manual.
† Feeding method
„ Friction feed (front, rear)
„ Push tractor feed (front lever)
Copy
„ Push & Pull tractor feed (front, rear)
320
240
„ Pull tractor feed (front, rear, bottom)
286
† Feed speed
358
„ Normal mode:
205
„ Copy mode:
239
80
96
120
137
159
guangzhou epson service :020-84207330
Specifications
Same as for LQ-2180
1/6 inch feed = 45 m sec
Continuous feed =0.092 MPW (m/second)
3.6 IPS (inches/second)
Revision A
9