Raleigh Audio RAKK dac Mark III Extreme Preamplifier Assembly Manual page 41

Back panel Parts
In addition to the parts received with the Analog Input kit, these parts are provided
Part
Back Panel custom
AC inlet module Black with three prongs
Fuse 0.5A, 250V 5 x 20mm for 115VAC
0.315A, 250V 5 x 20mm for 230VAC
RCA jack Optional output jacks
XLR jack Optional output jacks
Switch, toggle For RCA/XLR or Ground lift
Wire List
From this, twisted pairs and individual pieces are called out in the individual assembly steps.
Twisted wires are best made using a small electrical drill to do the twisting. Between 4 and 5
twists per inch is good. Be sure not to twist all the wire of a given color as some individual
pieces are needed as well as twisted ones. Remember the twisting will slightly shrink the length
so take this into account.
Part
Wire, 20 gauge white
black
red
green
grey
yellow
Wire, 22 gauge black
blue
orange
Wire, 18 gauge solid
Description
Description
40
Qty
1
1
2
0, 2, 4, 6
0, 2, 4, 6
1
Qty
20"
100"
23"
60"
15"
15"
140"
60"
50"
2"