Raleigh Audio RAKK dac Mark III Extreme Preamplifier Assembly Manual page 26

Wire the Line Inputs
6. Connect the orange/black twisted pair from the right "OUT" pads on the RAKK Input board
to the right "Line Input" pads on the Active Output. Connect the orange wire to the "R+"
pad and the black wire to the "R-" pad.
7. Connect the blue/black twisted pair from the left "OUT" pads on the RAKK Input board to
the left "Line Input" pads on the Active Output. Connect the blue wire to the "L+" pad and
the black wire to the "L-" pad.
————————————————————————————
Wire the Outputs
8. Connect the orange/black twisted pair from the right output jack to the "Right Output" pads
on the Active Output. Connect the orange wire to the "R+" pad and the black wire to the "R-
" pad.
9. Connect the blue/black twisted pair from the left output jack to the "Left Output" pads on the
Active Output. Connect the blue wire to the "L+" pad and the black wire to the "L-" pad.
————————————————————————————
————————————————————————————
25