Table of Contents
Advertisement
Final Assembly
1. Position the top panel on the top of the unit and secure with nine 6-32 x ¼" Phillips head
screws. Tighten these screws.
————————————————————————————
2. Install the knobs. Align the knobs and tighten the setscrews using a 1.5mm. hex wrench.
The power-on switch and volume control have 6mm shafts while the select switch has a ¼"
(6.35mm) shaft. Therefore the knob for the select switch has a slightly larger hole than the
other knobs.
————————————————————————————
3. Apply optional labeling tape to the front panel.
————————————————————————————
Congratulations! You have finished the assembly and installation.
Enjoy the music and be aware that the character and quality of the sound will improve with time.
The first 100 hours are most noticeable so hold off making evaluations until after that.
38
Advertisement
Table of Contents
