Av Compu Link Remote Control System - JVC RX-7042S Instructions Manual

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC's video components (TV, VCR, and DVD player)
through the receiver.
This receiver is equipped with the AV COMPU LINK-III, which adds a function to operate JVC's video components through the video
components terminals.
To use this remote control system, connect the video components you want to operate, following the diagrams below and the procedure on
the next page.
CONNECTIONS 1: AV COMPU LINK connection
VCR
VHS
AV
COMPU LINK
Notes:
• When connecting the receiver and a TV with the AV COMPU LINK EX jack by using a component video cable, you cannot use automatic
selection of TV's input mode (see page 39).
• Make sure that the remote control code for the connected VCR is set to code "A."
• When connecting only the VCR or DVD player to the receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
CONNECTIONS 2: Video cable connection
This receiver is equipped with three types of the video terminals—S-video, composite video, and component video, and the signals coming
into this receiver through one type of video jacks can output only through the jack of the same type. So you need to connect the VCR and/or
DVD player to the TV using one of the following three ways:
• When using the AV COMPU LINK remote control system, set the component video input for the DVD player and the VCR
correctly (see "Setting the component video input" on page 26); otherwise, the correct input for this receiver will not be selected on the
TV.
CASE 1
When connecting the source equipment to the receiver through the S-video jacks, connect the receiver
to the TV's Video Input 1 jack (S-video input) using S-video cables.
CASE 2
When connecting the source equipment to the receiver through the composite video jacks, connect
the receiver to the TV's Video Input 2 jack (composite video input) using composite video cables.
CASE 3
When connecting the source equipment to the receiver through the component video jacks, connect
the receiver to the TV's Video Input 2 jack (component video input) using component video cables.
38
DVD player
DVD
AV
COMPU LINK
Source
equipment
S-video cord
Source
equipment
Composite
video cord
Source
equipment
Component
video cord
TV
AV
COMPULINK-
AV
COMPU LINK EX
AV
COMPU LINK- ΙΙΙ
This receiver
S-video cord
This receiver
Composite
video cord
This receiver
Component
video cord
CAUTION:
• You can only connect to the TV
with the AV COMPU LINK EX
or AV COMPU LINK-III jack.
• DO NOT connect to the TV
with AV COMPU LINK
RECEIVER/AMP jack.
IMPORTANT:
The AV COMPU LINK remote
control system cannot control the
DBS tuner.
TV
To Video Input 1
TV
To Video Input 2
TV
To Video Input 2