Specifications - JVC RX-7042S Instructions Manual

Specifications

Amplifier
Output Power
At Stereo Operation
Front Channel: 130 W per channel, min. RMS, driven into 8
Ω, 20 Hz to 20 kHz, with no more than
0.08% total harmonic distortion.
At Surround Operation
Front Channel: 130 W per channel, min. RMS, driven into 8
Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
130 W, min. RMS, driven into 8 Ω at 1 kHz,
Center Channel:
with no more than 0.8% total harmonic
distortion.
Surround Channel: 130 W per channel, min. RMS, driven into 8
Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
Surround Back Channel:
130 W, min. RMS, driven into 8 Ω at 1 kHz,
with no more than 0.8% total harmonic
distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz)
DVD IN, VCR IN, TV SOUND/DBS IN:
CD IN, TAPE/CDR IN:
Audio Input (DIGITAL IN)*
Coaxial DIGITAL 1 (DVD):
Optical DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS (with
sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level SUBWOOFER OUT:
Recording Output Level VCR OUT, TAPE/CDR OUT:
Digital Output Optical
Signal-to-Noise Ratio ('66 IHF/'78 IHF)
DVD IN, VCR IN, TV SOUND/DBS IN:
CD IN, TAPE/CDR IN:
Frequency Response (8 Ω)
DVD IN, VCR IN, TV SOUND/DBS IN:
CD IN, TAPE/CDR IN:
Bass Boost:
Equalization
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz: ±8 dB (in 2 dB steps)
46
200 mV/47 kΩ
200 mV/47 kΩ
0.5 V(p-p)/75 Ω
200 mV
DIGITAL OUT
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
87 dB/80 dB
87 dB/80 dB
20 Hz to 100 kHz (+1 dB, –3 dB)
20 Hz to 100 kHz (+1 dB, –3 dB)
+6 dB ±1.0 dB at 100 Hz
Video
Video Input Sensitivity/Impedance
Composite Video DVD IN, VCR IN, TV SOUND/DBS IN:
S-video DVD IN, VCR IN, TV SOUND/DBS IN
(Y: luminance):
(C: chrominance, burst):
Component Video DVD IN, DBS (VCR) IN
(Y: luminance):
(P
Video Output Level
Composite Video VCR OUT, MONITOR OUT:
S-video VCR OUT, MONITOR OUT
(Y: luminance):
(C: chrominance, burst):
Component Video MONITOR OUT
(Y: luminance):
(P
Synchronization:
Signal-to-Noise Ratio:
FM tuner (IHF)
Tuning Range:
Usable Sensitivity
50 dB Quieting Sensitivity
Stereo Separation at OUT (REC):
AM tuner
Tuning Range:
1 V
General
Power Requirements:
Power Consumption:
Dimensions (W x H x D):
Mass:
Designs & specifications are subject to change without notice.
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
/P ):
B R
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
/P ):
B R
87.5 MHz to 108.0 MHz
12.8 dBf (1.2 µV/75 Ω)
Monaural:
16.0 dBf (1.7 µV/75 Ω)
Monaural:
37.5 dBf (20.5 µV/75 Ω)
Stereo:
35 dB at 1 kHz
530 kHz to 1 710 kHz
AC 120 V
320 W/440 VA (at operation)
2 W (in standby mode)
435 mm x 157 mm x 425 mm
Negative
45 dB
, 60 Hz
12.1 kg