OHAUS Valor 1000 Series Instruction Manual
Hide thumbs
Also See for Valor 1000 Series:
- Instruction manual (140 pages) ,
- User manual (77 pages) ,
- Service manual (38 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for OHAUS Valor 1000 Series
Summary of Contents for OHAUS Valor 1000 Series
- Page 1 Valor 1000 Series Instruction Manual (Spanish) (French) (German) (Italian)
-
Page 2: Safety Precautions
OHAUS Valor 1000 Series EN-1 1. INTRODUCTION This manual contains installation, operation and maintenance instructions for the Ohaus Valor 1000 Series Scales. Please read the manual completely before using the scale. 1.1 Safety Precautions Please follow these safety precautions: • Verify AC Adapter input voltage matches the local AC power supply. -
Page 3: Installation
EN-2 OHAUS Valor 1000 Series TABLE 1-2. CONTROL FUNCTIONS. Button Action Function ZERO Short Press Sets display to zero Enter Menu Press Confirms settings TARE Short Press Tares weight of item on pan Menu Press Decrement over and under settings... -
Page 4: Battery Power
AC power line. NOTE: • Charging the scale must only be performed in a dry environment CAUTION: Battery is to be replaced only by an authorized Ohaus service dealer Risk of explosion can occur if replaced with the wrong type or connected... -
Page 5: Initial Calibration
EN-4 OHAUS Valor 1000 Series 2.4 Initial Calibration When the scale is operated for the first time, a Span calibration is recommended to ensure accurate weighing results. Before performing the calibration, be sure to have the appropriate calibration weight. Refer to section 4.3 for Span calibration procedures. -
Page 6: Changing Units Of Measure
OHAUS Valor 1000 Series EN-5 next sample. Repeat this process until all samples have been weighed. Review the accumulation data by pressing M+ when the display is at zero. The display shows the number of samples [n----x] Press M+ to view the maximum sample weight [Hxxxxx]. -
Page 7: Span Calibration
EN-6 OHAUS Valor 1000 Series Press SELECT to change the alarm setting. Press ENTER to confirm setting and display [End] Press and hold ZERO key then press SELECT to return to weighing. 4.2 Backlight Press and hold ZERO button until [b9---x] is displayed, where x=... -
Page 8: Maintenance
5.3 Service Information If the troubleshooting section does not resolve or describe your problem, contact your authorized Ohaus service agent. For service assistance or technical support in the United States call toll-free 1-800-526-0659 between 8.00 AM and 5:00 PM EST. An... -
Page 9: Technical Data
EN-8 OHAUS Valor 1000 Series www.ohaus.com USA, please visit our web site, to locate the Ohaus office nearest you. 6. TECHNICAL DATA The technical data is valid under the following ambient conditions: Ambient temperature: 0°C to 40°C, Maximum Relative humidity: 80% for temperatures up to 31°1C, decreasing linearity to 50% relative humidity at 40°C. - Page 10 Mark Standard This product conforms to the EMC directive 2004/108/EC and the Low Voltage Directive 2006/95/EC. The complete declaration of Conformity is available from Ohaus Corporation AS/NZS4251.1 Emission; AS/NZS4252.1 Immunity Disposal In conformance with the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) this device may not be disposed of in domestic waste.
-
Page 11: Limited Warranty
Ohaus. In lieu of a properly returned warranty registration card, the warranty period shall begin on the date of shipment to the authorized dealer. - Page 12 *80251220* P/N 80251220 © Ohaus Corporation 2007, all rights reserved / todos los derechos reservados / tous droits réservés / Alle Rechte vorbehalten / tutti i diritti riservati. Printed in China / Impreso en la China / Imprimé en Chine / Gedruckt in China / Stampato in...