Page 1
Level the scale: Adjust leveling feet so bubble is centered: Leveling Leveling Bubble Feet SELECTING THE LOCATION: Place on a firm, steady surface with sufficient space. Avoid excessive air current, vibrations, heat sources, or rapid temperature changes. ™ Ohaus Corporation www.ohaus.com Valor 1000 Quick Start Guide...
Page 2
Use only approved accessories and peripherals, as available. • Operate the product only under ambient conditions specified in the Instruction Manual. • Service should be performed by authorized personnel only. • ™ Valor 1000 Quick Start Guide Ohaus Corporation www.ohaus.com...
Page 3
Change unit of measure while long-pressing SELECT button When setting over and under values, SELECT Short Press shift to next digit Units ( ) Menu Press Change unit of measure with short press of M+ ™ Ohaus Corporation www.ohaus.com Valor 1000 Quick Start Guide...
Page 4
Press TARE to change the setting. Press ZERO to confirm the setting and return to weighing. Verify the scale: place a known mass on it and check if the reading is accurate. If not, calibrate, using the Calibration Guide. *80252979* P/N 80252979 ™ Valor 1000 Quick Start Guide Ohaus Corporation www.ohaus.com...