Synology DiskStation User Manual page 127

Set up Computer to Access Print Server
After the print server is set up on your DiskStation, Windows, Mac, and Linux client over the local area network
can connect to the print server and access its print/fax/scan service.
To set up print server access with Windows:
1 Install and open Synology Assistant on your computer.
2 Click the
cannot see the
corner.
Note:
Using Synology Assistant to set up print server access under the
DiskStations running on DSM v2.0.1-3.0368 and onward.
Using Synology Assistant to set up print server access under the
DiskStations running on DSM v3.1-1553 and onward.
For other methods of setting up print server access, open DSM Help, go to and refer to Other methods to set up a
Network Printer.
To set up print server access with Mac OS X:
1 Make sure DSM's Bonjour Printer Broadcast function is enabled. See "Manage Mac File Service" on Page 68
for more information.
2 For ways of setting up printer server access with Mac OS X, click the
top-right corner of the
section.
After the print server access is set up, clients over the local area network can access the printing/faxing/scanning
service provided by the print server.
127 Chapter 10: Host Websites, Email Server, and Print Server
Downloaded from www.Manualslib.com
Printer Device tab, click the Add
Printer Device tab, enable it by clicking the
External Devices
manuals search engine
button, and follow the wizard to complete the setup process. If you
Settings button (with a gear icon) at the top-right
Network Printer
Network MFP
Help
tab, and then refer to the Set up The USB Printer With Your Mac
Synology DiskStation User's Guide
Based on DSM 3.1
mode is only available for
mode is only available for
button (with a question mark) at the