Access Files Via Ftp - Synology DiskStation User Manual

Access Files via FTP

If your Synology DiskStation is accessible over the Internet, you can use a FTP application to access the shared
folders.
Note:
your DiskStation from the Internet" on Page 59.
Go to Main Menu
Synology DiskStation data via FTP.
To enable FTP service:
1 Tick
2 Enter a value in
3 Specify the
range between 1025 and 65535.
4 Click OK.
Note:
 The default port number for the FTP service is 21. You can set it from 1 to 65535, excluding the following numbers:
20, 22, 23, 25, 80, 110, 137, 138, 139, 143, 199, 443, 445, 515, 543, 548, 587, 873, 993, 995, 3306, 3689, 5000,
5001, 5005, 5006, 5335, 5432, 9997, 9998, 9999, BitTorrent default port range: 6881-6890, and Surveillance
Station default port range: 55736-55863.
 The port range of Passive (PASV) FTP can be from 1025 to 65535. It can contain up to 128 ports.
 The guest account cannot log in to DiskStation via FTP.
 The codepage setting on the FTP client computer must be the same as that of the Synology DiskStation in order to
access the data correctly.
 On some specific models, FTP service supports connecting using SSL or TLS.
91 Chapter 8: Access Files from Anywhere
Downloaded from www.Manualslib.com
For more information about making Synology DiskStation accessible over the Internet, see "Chapter 5: Access
> Control Panel > FTP
Enable FTP service.
Port number setting of FTP service
Port range of Passive FTP
manuals search engine
to enable FTP service, allowing users to upload or download
(The default number is 21).
(PASV) by using the default range (55536-55663) or entering any
Synology DiskStation User's Guide
Based on DSM 3.1